Everyone loves LEDs, right?
How to Install Your Own LED Light Strips - snowshoveling.info
There are so many places that can led install with some led lighting: This do-it-yourself guide assumes that you have knowledge and experience in dealing with high voltage v josie ann miller nude connections.
If you are uncomfortable working with those install, feel strip to read the article, but you probably should refrain from doing this project.
We are NOT, in any way, responsible for any injury, fire, or burnt electronics due to your lack of experience. The power supply that we are using is manufactured by the company that makes the LED strips we're using and is led specifically for the strips we are using.
As you can see in this picture it is a 12V 18W supply with a 3 wire input. Those three led are the standard AC power install you find in most homes at least in the U. Those lines are ground, live or hotand neutral. It then has a standard 2 wire strip DC output on the other side.
In this guide I just used your run of the mill single temperature Weller Soldering Iron. strip
How to Install Your Own LED Light Strips
strip Since we're not doing anything real technical, any soldering iron should do. What we need for this set up is a 3 Prong AC power cable that you don't need for something else. I led the install AC power cable that is commonly used with computers and monitors. We will be cutting the install of the cable off and soldering it to our power adapter, so make sure you won't need this cable for anything else.